Memory For Power Mac

18.10.2020by
  1. Memory For Power Mac G5
  2. Mac Memory Store
  3. Memory For Mac Desktop
  4. Memory Upgrade Mac

Choose your iMac model

If you're not sure which iMac you have, you can identify your iMac and then select it from the list below.

27-inch

24-inch

21.5-inch

  • iMac (Retina 4K, 21.5-inch, 2019)*
  • iMac (Retina 4K, 21.5-inch, 2017)*
  • iMac (21.5-inch, 2017)*
  • iMac (21.5 inch, Mid 2014)*
  • iMac (21.5-inch, Late 2013)*
  • iMac (21.5-inch, Late 2012)*

20-inch

17-inch

In order to use ECC Memory in Power Mac G5 - all installed memory must be of the ECC Non-Registered type. ECC memory is recommended when using G5 as a high-performance server or for mission critical applications which require precision data with no error tolerance. ECC Memory is able to correct errors caused by random neutrino partical encounters.

A-Tech for Apple 2GB Kit 2X 1GB PC3200 400MHz Power Mac G5 Mid 2004 Late 2003 Early 2005 M9031LL/A A1047 M9032LL/A M9393LL/A M9455LL/A M9457LL/A M9748LL/A M9749LL/A Memory RAM 4.4 out of 5 stars 2 $21.98 $ 21. We carry RAM upgrades for all Apple Power Mac models listed below and guarantee that the recommended memory for your Apple Power Mac found here is compatible, quality tested and backed by our lifetime commitment to customer satisfaction. 3.5GHz 8‑core Intel Xeon W processor, Turbo Boost up to 4.0GHz. 3.3GHz 12‑core Intel. 16GB 2 x 8GB Memory RAM for iMac Late 2012 MacBook Pro Mid 2012 A1418 MD094LL/A $59.99 A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G.

* Memory is not removable by users on iMac (21.5-inch, Late 2012), iMac (21.5-inch, Late 2013), iMac (21.5-inch, Mid 2014), iMac (21.5-inch, 2017), iMac (Retina 4K, 21.5-inch, 2017), and iMac (Retina 4K, 21.5-inch, 2019). If the memory in one of these computers needs repair service, contact an Apple Retail Store or Apple Authorized Service Provider. If you’d like to upgrade the memory in one of these models, an Apple Authorized Service Provider can help. Before you schedule an appointment, confirm that the specific Apple Authorized Service Provider offers memory upgrade services.

Memory in iMac (21.5-inch, Late 2015), and iMac (Retina 4K, 21.5-inch, Late 2015) is not upgradeable.

iMac (Retina 5K, 27-inch, 2020)

Get memory specifications for iMac (Retina 5K, 27-inch, 2020), then learn how to install memory in this model.

Memory specifications

This iMac model features Synchronous Dynamic Random-Access Memory (SDRAM) slots on the rear of the computer near the vents with these memory specifications:

Number of memory slots4
Base memory8GB (2 x 4GB DIMMs)
Maximum memory128GB (4 x 32GB DIMMs)

For optimal memory performance, DIMMs should be the same capacity, speed, and vendor. Use Small Outline Dual Inline Memory Modules (SO-DIMM) that meet all of these criteria:

  • PC4-21333
  • Unbuffered
  • Nonparity
  • 260-pin
  • 2666MHz DDR4 SDRAM

If you have mixed capacity DIMMs, see the install memory section for installation recommendations.

iMac (Retina 5K, 27-inch, 2019)

Get memory specifications for iMac (Retina 5K, 27-inch, 2019), then learn how to install memory in this model.

Memory specifications

This iMac model features Synchronous Dynamic Random-Access Memory (SDRAM) slots on the rear of the computer near the vents with these memory specifications:

Number of memory slots4
Base memory8GB (2 x 4GB DIMMs)
Maximum memory64GB (4 x 16GB DIMMs)

Use Small Outline Dual Inline Memory Modules (SO-DIMM) that meet all of these criteria:

  • PC4-21333
  • Unbuffered
  • Nonparity
  • 260-pin
  • 2666MHz DDR4 SDRAM

iMac (Retina 5K, 27-inch, 2017)

Get memory specifications for iMac (Retina 5K, 27-inch, 2017), then learn how to install memory in this model.

Memory specifications

This iMac model features Synchronous Dynamic Random-Access Memory (SDRAM) slots on the rear of the computer near the vents with these memory specifications:

Number of memory slots4
Base memory8GB (2 x 4GB DIMMs)
Maximum memory64GB (4 x 16GB DIMMs)

Use Small Outline Dual Inline Memory Modules (SO-DIMM) that meet all of these criteria:

  • PC4-2400 (19200)
  • Unbuffered
  • Nonparity
  • 260-pin
  • 2400MHz DDR4 SDRAM

iMac (Retina 5K, 27-inch, Late 2015)

Get memory specifications for iMac (Retina 5K, 27-inch, Late 2015), then learn how to install memory in this model.

Memory specifications

This iMac model features Synchronous Dynamic Random-Access Memory (SDRAM) slots on the rear of the computer near the vents with these memory specifications:

Number of memory slots4
Base memory8GB
Maximum memory32GB

Use Small Outline Dual Inline Memory Modules (SO-DIMM) that meet all of these criteria:

  • PC3-14900
  • Unbuffered
  • Nonparity
  • 204-pin
  • 1867MHz DDR3 SDRAM

For these 27-inch models

Get memory specifications for the following iMac models, then learn how to install memory in them:

  • iMac (Retina 5K, 27-inch, Mid 2015)
  • iMac (Retina 5K, 27-inch, Late 2014)
  • iMac (27-inch, Late 2013)
  • iMac (27-inch, Late 2012)

Memory specifications

These iMac models feature Synchronous Dynamic Random-Access Memory (SDRAM) slots on the rear of the computer near the vents with these memory specifications:

Number of memory slots4
Base memory8GB
Maximum memory32GB

Use Small Outline Dual Inline Memory Modules (SO-DIMM) that meet all of these criteria:

  • PC3-12800
  • Unbuffered
  • Nonparity
  • 204-pin
  • 1600MHz DDR3 SDRAM
Mac memory store

Installing memory

The internal components of your iMac can be warm. If you've been using your iMac, wait ten minutes after shutting it down to let the internal components cool.

After you shut down your iMac and give it time to cool, follow these steps:

  1. Disconnect the power cord and all other cables from your computer.
  2. Place a soft, clean towel or cloth on the desk or other flat surface to prevent scratching the display.
  3. Hold the sides of the computer and slowly lay the computer face-down on the towel or cloth.
  4. Open the memory compartment door by pressing the small grey button located just above the AC power port:
  5. The memory compartment door will open as the button is pushed in. Remove the compartment door and set it aside:
  6. A diagram on the underside of the compartment door shows the memory cage levers and the orientation of the DIMM. Locate the two levers on the right and left sides of the memory cage. Push the two levers outward to release the memory cage:
  7. After the memory cage is released, pull the memory cage levers toward you, allowing access to each DIMM slot.
  8. Remove a DIMM by pulling the module straight up and out. Note the location of the notch on the bottom of the DIMM. When reinstalling DIMMs, the notch must be oriented correctly or the DIMM won't fully insert:
  9. Replace or install a DIMM by setting it down into the slot and pressing firmly until you feel the DIMM click into the slot. When you insert a DIMM, make sure to align the notch on the DIMM to the DIMM slot. Find your model below for specific installation instructions and notch locations:
    • iMac (Retina 5K, 27-inch, 2020) DIMMs have a notch on the bottom, slightly left of the middle. If your DIMMs are mixed in capacity, minimize the capacity difference between Channel A (slots 1 and 2) and Channel B (slots 3 and 4) when possible.
    • iMac (Retina 5K, 27-inch, 2019) DIMMs have a notch on the bottom, slightly left of the middle:
    • iMac (27-inch, Late 2012) and iMac (Retina 5K, 27-inch, 2017) DIMMs have a notch on the bottom left:
    • iMac (27-inch, Late 2013) and iMac (Retina 5K, 27-inch, Late 2014, Mid 2015, and Late 2015) DIMMs have a notch on the bottom right:
  10. After you install all of your DIMMs, push both memory cage levers back into the housing until they lock into place:
  11. Replace the memory compartment door. You don't need to press the compartment door release button when replacing the compartment door.
  12. Place the computer in its upright position. Reconnect the power cord and all other cables to the computer, then start up the computer.

Your iMac performs a memory initialization procedure when you first turn it on after upgrading memory or rearranging DIMMs. This process can take 30 seconds or more, and the display of your iMac remains dark until it's finished. Make sure to let the memory initialization complete.

For these 27-inch and 21.5-inch models

Get memory specifications for the following iMac models, then learn how to install memory in them:

  • iMac (27-inch, Mid 2011)
  • iMac (21.5-inch, Mid 2011)
  • iMac (27-inch, Mid 2010)
  • iMac (21.5-inch, Mid 2010)
  • iMac (27-inch, Late 2009)
  • iMac (21.5-inch, Late 2009)

Memory specifications

Number of memory slots4
Base memory4GB (but is configured to order)
Maximum memory16GB
For iMac (Late 2009), you can use 2GB or 4GB RAM SO-DIMMs of 1066MHz DDR3 SDRAM in each slot. For iMac (Mid 2010) and iMac (Mid 2011), use 2GB or 4GB RAM SO-DIMMs of 1333MHz DDR3 SDRAM in each slot.

Use Small Outline Dual Inline Memory Modules (SO-DIMM) that meet all of these criteria:

iMac (Mid 2011)iMac (Mid 2010)iMac (Late 2009)
PC3-10600PC3-10600PC3-8500
UnbufferedUnbufferedUnbuffered
NonparityNonparityNonparity
204-pin204-pin204-pin
1333MHz DDR3 SDRAM1333MHz DDR3 SDRAM1066MHz DDR3 SDRAM

i5 and i7 Quad Core iMac computers come with both top memory slots populated. These computers will not start up if only a single DIMM is installed in any bottom slot; these computers should operate normally with a single DIMM installed in any top slot.

Core Duo iMac computers should operate normally with a single DIMM installed in any slot, top or bottom. ('Top' and 'bottom' slots refer to the orientation of the slots in the pictures below. 'Top' refers to the slots closest to the display; 'bottom' refers to the slots closest to the stand.)

Installing memory

The internal components of your iMac can be warm. If you've been using your iMac, wait ten minutes after shutting it down to let the internal components cool.

After you shut down your iMac and give it time to cool, follow these steps:

  1. Disconnect the power cord and all other cables from your computer.
  2. Place a soft, clean towel or cloth on the desk or other flat surface to prevent scratching the display.
  3. Hold the sides of the computer and slowly lay the computer face-down on the towel or cloth.
  4. Using a Philips screwdriver, remove the RAM access door in the bottom of your computer:
  5. Remove the access door and set it aside.
  6. Untuck the tab in the memory compartment. If you're replacing a memory module, gently pull the tab to eject any installed memory module:
  7. Insert your new or replacement SO-DIMM into the empty slot, noting the orientation of the keyway of the SO-DIMM as shown below.
  8. After you insert it, press the DIMM up into the slot. There should be a slight click when you seat the memory correctly:
  9. Tuck the tabs above the memory DIMMs, and reinstall the memory access door:
  10. Place the computer in its upright position. Reconnect the power cord and all other cables to the computer, then start up the computer.

For these 24-inch and 20-inch models

Get memory specifications for the following iMac models, then learn how to install memory in them:

  • iMac (24-inch, Early 2009)
  • iMac (20-inch, Early 2009)
  • iMac (24-inch, Early 2008)
  • iMac (20-inch, Early 2008)
  • iMac (24-inch Mid 2007)
  • iMac (20-inch, Mid 2007)

Memory specifications

These iMac computers have two side-by-side Synchronous Dynamic Random-Access Memory (SDRAM) slots in the bottom of the computer.

The maximum amount of random-access memory (RAM) you can install in each computer is:

ComputerMemory TypeMaximum Memory
iMac (Mid 2007)DDR24GB (2x2GB)
iMac (Early 2008)DDR24GB (2x2GB)
iMac (Early 2009)DDR38GB (2x4GB)

You can use a 1GB or 2GB RAM module in each slot for iMac (Mid 2007) and iMac (Early 2008). Use 1GB, 2GB, or 4GB modules in each slot for the iMac (Early 2009).

Use Small Outline Dual Inline Memory Modules (SO-DIMM) that meet all of these criteria:

iMac (Mid 2007)iMac (Early 2008)iMac (Early 2009)
PC2-5300PC2-6400PC3-8500
UnbufferedUnbufferedUnbuffered
NonparityNonparityNonparity
200-pin200-pin204-pin
667MHz DDR2 SDRAM800MHz DDR2 SDRAM1066MHz DDR3 SDRAM

DIMMs with any of the following features aren't supported:

  • Registers or buffers
  • PLLs
  • Error-correcting code (ECC)
  • Parity
  • Extended data out (EDO) RAM

Installing memory

The internal components of your iMac can be warm. If you've been using your iMac, wait ten minutes after shutting it down to let the internal components cool.

After your iMac cools down, follow these steps:

  1. Disconnect the power cord and all other cables from your computer.
  2. Place a soft, clean towel or cloth on the desk or other flat surface to prevent scratching the display.
  3. Hold the sides of the computer and slowly lay the computer face-down on the towel or cloth.
  4. Using a Philips screwdriver, remove the RAM access door in the bottom of the computer:
  5. Remove the access door and set it aside.
  6. Untuck the tab in the memory compartment. If you're replacing a memory module, untuck the tab and pull it to eject any installed memory module:
  7. Insert your new or replacement RAM SO-DIMM into the empty slot, noting the orientation of the keyway of the SO-DIMM as shown above.
  8. After you insert it, press the DIMM up into the slot. There should be a slight click when you seat the memory correctly.
  9. Tuck the tabs above the memory DIMMs, and reinstall the memory access door:
  10. Place the computer in its upright position. Reconnect the power cord and all other cables to the computer, then start up the computer.

For these 20-inch and 17-inch models

Get memory specifications for the following iMac models, then learn how to install memory in them:

  • iMac (20-inch Late 2006)
  • iMac (17-inch, Late 2006 CD)
  • iMac (17-inch, Late 2006)
  • iMac (17-inch, Mid 2006)
  • iMac (20-inch, Early 2006)
  • iMac (17-inch, Early 2006)

Memory specifications

Number of memory slots2
Base memory1GBTwo 512MB DIMMs; one in each of the memory slotsiMac (Late 2006)
512MBOne DDR2 SDRAM installed into the top slotiMac (17-inch Late 2006 CD)
512MBTwo 256MB DIMMs; one in each of the memory slotsiMac (Mid 2006)
512MBOne DDR2 SDRAM installed into the top slotiMac (Early 2006)
Maximum memory4GB2 GB SO-DIMM in each of the two slots*iMac (Late 2006)
2GB1GB SO-DIMM in each of the two slotsiMac (17-inch Late 2006 CD)
iMac (Early 2006)
Memory card specificationsCompatible:
- Small Outline Dual Inline Memory Module (DDR SO-DIMM) format
- PC2-5300
- Nonparity
- 200-pin
- 667 MHz
- DDR3 SDRAM
Not compatible:
- Registers or buffers
- PLLs
- ECC
- Parity
- EDO RAM

For best performance, fill both memory slots, installing an equal memory module in each slot.
*iMac (Late 2006) uses a maximum of 3 GB of RAM.

Installing memory in the bottom slot

The internal components of your iMac can be warm. If you've been using your iMac, wait ten minutes after shutting it down to let the internal components cool.

After you shut down your iMac and give it time to cool, follow these steps:

  1. Disconnect the power cord and all other cables from your computer.
  2. Place a soft, clean towel or cloth on the desk or other flat surface to prevent scratching the display.
  3. Hold the sides of the computer and slowly lay the computer face-down on the towel or cloth.
  4. Using a Phillips screwdriver, remove the RAM access door on the bottom of the iMac and set it aside:
  5. Move the DIMM ejector clips to their fully open position:
  6. Insert your RAM SO-DIMM into the bottom slot, keeping in mind the orientation of the keyed SO-DIMM:
  7. After you insert it, press the DIMM up into the slot with your thumbs. Don't use the DIMM ejector clips to push in the DIMM, as this might damage the SDRAM DIMM. There should be a slight click when you seat the memory fully.
  8. Close the ejector clips:
  9. Reinstall the memory access door:
  10. Place the computer in its upright position. Reconnect the power cord and all other cables to the computer, then start up the computer.

Replacing memory in the top slot

After you shut down your iMac and give it time to cool, follow these steps:

  1. Disconnect the power cord and all other cables from your computer.
  2. Place a soft, clean towel or cloth on the desk or other flat surface to prevent scratching the display.
  3. Hold the sides of the computer and slowly lay the computer face-down on the towel or cloth.
  4. Using a Phillips screwdriver, remove the RAM access door on the bottom of the iMac and set it aside:
  5. Pull the two levers on each side of the memory compartment to eject the memory module that's already installed:
  6. Remove the memory module from your iMac as shown below:
  7. Insert your RAM SO-DIMM into the top slot, noting the orientation of the keyed SO-DIMM:
  8. After you insert it, press the DIMM up into the slot with your thumbs. Don't use the DIMM ejector clips to push in the DIMM, as this might damage the SDRAM DIMM. There should be a slight click when you seat the memory fully.
  9. Close the ejector clips:
  10. Reinstall the memory access door:
  11. Place the computer in its upright position. Reconnect the power cord and all other cables to the computer, then start up the computer.

If your iMac makes a tone after you install memory

iMac models introduced before 2017 might make a warning sound when you start up after installing or replacing memory:

  • One tone, repeating every five seconds signals that no RAM is installed.
  • Three successive tones, then a five-second pause (repeating) signals that RAM doesn't pass a data integrity check.

If you hear these tones, confirm that the memory you installed is compatible with your iMac and that it's installed correctly by reseating the memory. If your Mac continues to make the tone, contact Apple Support.

Confirm that your iMac recognizes its new memory

After you install memory, you should confirm that your iMac recognizes the new RAM by choosing Apple () menu > About This Mac.

The window that appears lists the total memory, including the amount of memory that originally came with the computer plus the newly added memory. If all the memory in the iMac has been replaced, it lists the new total of all installed RAM.

For detailed information about the memory installed in your iMac, click System Report. Then choose Memory under the Hardware section in the left side of System Information.

If your computer doesn't recognize the memory or doesn't start up correctly, confirm that the RAM you installed is compatible with your iMac and that it's installed correctly by reseating the memory. If you continue to have issues with the memory in your iMac, contact Apple Support.

Power Macintosh 9500 / Power Macintosh 9515
DeveloperApple Computer, Inc.
Product familyPower Macintosh
Release dateJune 19, 1995[1]
Introductory priceUS$4,699 (equivalent to $7,884 in 2019)
DiscontinuedFebruary 17, 1997
Operating systemSystem 7.5.2 - Mac OS 9.1
CPUPowerPC 604 @ 120,132,150,180x2,200 MHz
MemoryExpandable to 1.5 GB (168 pin DIMM 5V)
DimensionsHeight: 16.9 inches (43 cm)
Width: 7.7 inches (20 cm)
Depth: 15.75 inches (40.0 cm)
Mass28 pounds (13 kg)
PredecessorMacintosh Quadra 950
SuccessorPower Macintosh 9600

Memory For Power Mac G5

The Power Macintosh 9500 (sold as Power Macintosh 9515 in Europe and Asia[2]) is a personal computer designed, manufactured and sold by Apple Computer, Inc. from June 1995 to February 1997.[3] It is powered by a PowerPC 604 processor, a second-generation PowerPC chip which is faster than the PowerPC 601 chip used in the Power Macintosh 8100. The 180MP and 200 MHz models, introduced August 1996, use the enhanced PowerPC 604e processor.

MacWorld Magazine gave the 9500 a positive review, concluding that it is 'not the second-generation Power Mac for the rest of us — it's too pricey .. but it is an excellent foundation for a high-end graphics workstation — for color publishing or media production. Its speed and expandability should also made it popular in the scientific and technical markets.'[4] Their benchmarks showed that the 9500 overcame the Quadra 950's performance deficit when running older Mac software in the Mac 68k emulator, posting speeds almost twice as fast as the Quadra 900.

The 9500 was replaced by the Power Macintosh 9600.

Hardware[edit]

Rear view of a Power Macintosh 9500/132.

The 9500 includes several technological firsts for Apple. The CPU is connected via a daughterboard, and so can be swapped easily. Available were single-processor cards ranging from 120 to 200 MHz, and a dual processor card with two 180 MHz CPUs. This is also the first Macintosh to use the PCI standard, with six PCI slots available -- one of which must be used for a graphics card.[4] Infoworld's Anita Epler noted that 'Because most multimedia developers don't use the onboard video found on previous Mac models, Apple wisely economized by simply leaving it out. Users can purchase their own PCI graphics card or opt for Apple's 64-bit accelerated PCI video board with 2 MB of VRAM as an optional accessory.'[5]

The 9500 is also the first computer from Apple to support 168-pin DIMM memory modules, and the 512KB of on-board 128-bit-wide cache utilizes copy-back instead of write-through, offering faster speeds than prior Macintosh models,[4] as well as the ability to install single modules. The logic board has a total of 12 memory slots; like the Power Macintosh 8100, installing memory requires removing the logic board from the case. When it was introduced, 64 MB DIMMs were the largest available on the market, making for a maximum memory limit of 768 MB. Companies like Advantage Memory were selling DIMMs of this size for $3,900 USD each.[6] 128 MB DIMMs were introduced later in 1995, offering a theoretical limit of 1.5 GB memory, though System 7.5.2 is unable to use more than 1 GB of memory.

Some other firsts for a Macintosh include a regular 10BASE-T ethernet port alongside the AAUI port, as well as support for the new SCSI-2 Fast standard, and a 4X CD-ROM.[5]

The basic design of the logic board, called 'Tsunami',[5] was used by various Macintosh clone makers as a reference design [7] and a modified version was used in the non-Macintosh Apple Network Server series.

Utilizing a third-party G4 CPU upgrade[8] and the XPostFacto installation utility it is possible to run up to Mac OS X v10.5 'Leopard' on a 9500, making it the oldest model capable of running Mac OS X.

Models[edit]

Included as standard with all models are 16 MB RAM, 1 GB HDD, and AppleCD 600i 4x CD-ROM.

Introduced June 19, 1995:

  • Power Macintosh 9500/120[9]
  • Power Macintosh 9500/132: 132 MHz CPU, 2 GB HDD.[10][11]

Introduced October 2, 1995:

  • Power Macintosh 9515/132: Same as the 9500/132,[12][11] sold in Europe and Asia.[13]

Introduced April 22, 1996:

  • Power Macintosh 9500/150: 150 MHz CPU, 16 or 32 MB RAM, 2 GB HDD.[14][11]

Introduced August 5, 1996:

  • Power Macintosh 9500/180MP: Two 180 MHz PowerPC 604e CPUs, 16 or 32 MB RAM, 2 GB HDD, AppleCD 1200i 8x CD-ROM.[15][11]
  • Power Macintosh 9500/200: , 16 or 32 MB RAM, 2 GB HDD, AppleCD 1200i 8x CD-ROM.[16][11]

Timeline of Power Macintosh models


For 3.x and Windows, though, I came up dry searching for such.So, what I did for 3.x and Windows, I run PuTTY's command line plink as a subprocess, and interact with it using std in/out pipes. I've been using 3.x, but there are, I believe, public libraries that will support telnet and/or SSH for 2.x. Cisco iou keygen python software.

References[edit]

  1. ^'Power Macintosh 9500/132 Specs: EveryMac.com'.
  2. ^'Apple Power Macintosh 9515/132 Specs'. EveryMac.
  3. ^'Power Macintosh 9500/132 Specs: EveryMac.com'.
  4. ^ abcHeid, Jim (August 1995). 'First of a New Breed - Apple breaks with the past to deliver the fastest, most expandable Macintosh ever: the Power Mac 9500'. MacWorld. pp. 92–96.Cite magazine requires magazine= (help)
  5. ^ abcDeLisio, Fred (June 19, 1995). ''Tsunami' Hits New York City'. InfoWorld Magazine. pp. 1, 129.Cite magazine requires magazine= (help)
  6. ^'ADVANTAGE MEMORY CORPORATION TAKES NEW APPLE POWER MAC 9500 TO 768MB OF MEMORY -- NEW DRAM STANDARD NOW SHIPPING'. Advantage Memory Corporation. June 20, 1995.
  7. ^byte.com: Power Macs: Cookin' at 225 MHz
  8. ^Crescendo/PCI
  9. ^'Power Macintosh 9500/120: Technical Specifications'. Apple.
  10. ^'Power Macintosh 9500/132: Technical Specifications'. Apple.
  11. ^ abcde'Power Macintosh 9500 Series'(PDF). Apple Service Source.
  12. ^'Power Macintosh 9515/132 - Technical Specifications'. Apple.
  13. ^'Apple Power Macintosh 9515/132 Specs'. EveryMac.
  14. ^'Power Macintosh 9500/150 - Technical Specifications'. Apple.
  15. ^'Power Macintosh 9500/180MP - Technical Specifications'. Apple.
  16. ^'Power Macintosh 9500/200 - Technical Specifications'. Apple.

Mac Memory Store

External links[edit]

Memory For Mac Desktop

Wikimedia Commons has media related to Power Macintosh 9500.

Memory Upgrade Mac

Retrieved from 'https://en.wikipedia.org/w/index.php?title=Power_Macintosh_9500&oldid=953721530'
Comments are closed.